CUTTING OIL WS50 Milky White

Save 18%

Quantity: 26 Liters
Price:
Sale priceRs. 3,518.00 Regular priceRs. 4,290.00

Shipping calculated at checkout

Description

Water Soluble Coolants -WS50's main function is to remove heat from the cutting tool, chip and work piece. The cutting oils are manufactured from highly refined Group 2 base oils that are low in Sulphur content. Group II base oils are defined as being more than 90 percent saturates, less than 0.03 percent sulfur and with a viscosity index of 80 to 120. They are often manufactured by hydrocracking, which is a more complex process than what is used for Group I base oils. This gives better life to the tank compared to cutting oils made from Group 1 base oils. To perform the cooling function properly in a given operation, the viscosity of a finished cutting oil should be low enough to clear the chips and not insulate the heat from the operation, but high enough to control oil misting. RUST-X specialized cutting oils provide added benefits and specialized properties none other oils provide. These are achieved through Rust-X careful blending of select oils with appropriate additives which provide higher lubrication, excellent corrosion protection & longer tank life. For the maximum performance, from either mineral oil based, synthetic oil based or water soluble cutting fluids, Rust-x offers a complete selection of top quality metalworking oils for the industry. Soluble Oils are used where rapid heat removal is the major requirement. Rust X water Soluble Oils are blended from mineral oils, emulsifiers, rust inhibitors, extreme pressure additives and other coupling agents. The products are mixed with water in normal starting proportions of 3% to 10% for most operations. All RUST-X rust preventive oils are Barium & Heavy Metal Free.

FEATURES

  • Rust prevention to the component from cutting oils and water after machining
  • Cutting efficiency 1.5 to 2 times compared to conventional oils
  • Longer tank life 6-9 months without fouling owing to world class biocides
  • Higher lubrication due to better quality oils
  • Low concentration of blend 1:20 to 1:40 m Operational up to 700 ppm of hard water
  • Fewest nicks and wear ability on tools
  • Lower operational temperatures

APPLICATION

Soluble Oils are used where rapid heat removal is the major requirement. Rust X water Soluble Oils are blended from mineral oils, emulsifiers, rust inhibitors, extreme pressure additives and other coupling agents. The products are mixed with water in normal starting proportions of 3% to 10% for most operations.

TECHNICAL SPECIFICATION

 

Physical Properties   

Value

Colour                        

Milky white

Base oil     


Group II

Viscosity @ 40° C before solution             

 

  52 cSt

Emulsion Test Hard Water - No Oil and No Cream

 

700ppm

water by %(by weight)

 

0%

Corrosion - Number of pits and intensity of staining -

 

NIL

Froth Test at 400ppm         

 

Hard Water - No 

Cast Iron Corrosion              

Pass 

Specific gravity 

0.88-0.96

Flash point

100 ° C

pH @ 5%


8-9

Odour

Slight

Oil content                        

30-40%

Payment & Security

Airtel Money American Express Diners Club Discover Freecharge Mastercard MobiKwik Ola Money Paytm PayZapp RuPay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Recently viewed