Drawing & Forming EVAP2

Save 18%

Quantity: 26 Liter
Sale priceRs. 5,117.00 Regular priceRs. 6,240.00

Shipping calculated at checkout



EVAP-2 OIL is a MEDIUM DUTY solvent based Disappearing Lubricant designed for those applications wherein minimal oil film is permissible. This product leaves a thin imperceptible film of lubricant that facilitates a clean die release of thin sheet or roll stock. The carrier generally dries in 20 minutes to 1 hour. Normally, cleaning is not required after using vanishing lubricant.

EVAP-2    will  virtually disappear  - at pre-determined intervals - thus completely  eliminating  need  for any further  cleaning, degreasing, buffing or polishing prior to shipping in many operations. EVAP-2 specifically formulated for use in roll forming and press operations on pre finished and other specialty metals. EVAP-2  is a heavy duty grade intended for use in severe applications. It will provide better finish when forming heavier  gauge metals or tougher alloys. EVAP-2   is recommended for galvanized aluminum strip. processed parts and leave virtually no residue to react with other processing chemicals.

EVAP-2 contains select additives to provide optimum lubricity during metal stamping and forming, resulting in extended die life. The product formulation obtains the important balance of proper lubrication during metalworking, yet “vanishes” from parts in minimal time to avoid delays in the manufacturing process, and minimizing the need for manual cleaning of components. EVAP-2 is non-corrosive and nonstaining to aluminum, copper, steel and their alloys. 

EVAP 2  provides only short term corrosion protection for a few hours. EVAP 2 RP contains rust preventives and forms a slight film on the component and prevents corrosion for upto 1 week.


  • Excellent cooling and lubricating
  • Acid & alkali stable
  • Non-corrosive to aluminum, copper and other non-ferrous metals and ferrous metals.
  • Environmentally friendly
  • Evaporates rapidly. Leaves virtually no residue and No Odor.
  • Excellent wetting characteristics due to its additive treatment
  • Provides drying times of 15 to 30 minutes depending on ambient conditions
  • Intended for blanking and light forming of ductile metals
  • Reduced toll wear and give excellent part finish.
  • Easily cleaned by acid or alkaline cleaner.
  • Brightening not needed after cleaning.
  • Waste disposal does not require special reagents
  • 99% plus Volatile. Minimizes manual parts clean up. Easier to remove after forming operation.
  • Reduction of Fire risk with minimum dry times


  • Intended for blanking and light forming of ductile metals.
  • Can be used for Louvering
  • Can be used for Copper Tube bending
  • Can be used for cleaning & flushing of pipes
  • Can be used for cleaning greases and oils from components
  • Provides drying times of 15 to 30 minutes depending on ambient conditions.
  • Excellent wetting characteristics due to its additive treatment
  • Non-staining, non-corrosive, safe and clean to use



Test               EVAP 2




Visual             Transparent


Transpare nt Clear

Viscosity @ cSt @ 40°C

ASTM D  445 1 cSt



ASTM         D 0.8


GravityFlash Point             

1298ASTM D 92          100 oC

100 oC

Volatiles by % 

(by weight)







1-2 hours

1 week

Oil film after operation


0.1-0.3 micron

Payment & Security

Airtel Money American Express Diners Club Discover Freecharge Mastercard MobiKwik Ola Money Paytm PayZapp RuPay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Recently viewed